Replacing Fork Seals - looking for advice
Replacing Fork Seals - looking for advice
Has anyone changed their fork seals ?
I noticed a little oil seeping from the dust seal. I am getting prepped to replace the fork seals, so any advice would be grateful.
The Haynes manual says I would need a special Kawasaki tool (looks like tapered square section shaft) to keep the damper rod from turning.
Any tips? Thanks in advance,
I noticed a little oil seeping from the dust seal. I am getting prepped to replace the fork seals, so any advice would be grateful.
The Haynes manual says I would need a special Kawasaki tool (looks like tapered square section shaft) to keep the damper rod from turning.
Any tips? Thanks in advance,
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
I've been wondering about that myself. The previous owner of my '94 had a shop do that and it cost $225. So it's either quite time consuming or he got ripped off. instructions for the ninja 500 can be found here. I wonder how much of this translates over to the vulcan 500. Maybe take some pictures and we could put together a how-to.
-
- Posts: 168
- Joined: Sat Jan 23, 2010 5:51 am
- Location: NW Georgia
Re: Replacing Fork Seals - looking for advice
I've had a little leak, but no service required yet. Guy at the shop said if it gets bad it can leak down onto your brakes, which is not good...
GeorgiaRider
2006 Vulcan 500
Kuryakyan Foot Peg Extenders and Pegs
Memphis Shades Alley Cat Windshield
Saddlemen Large Slant Saddlebags
Powersports Mini-Tachometer
Kawasaki Luggage Rack
Kuryakyan Iso-Grips
Airhawk cushion
Marlin's Clock
2006 Vulcan 500
Kuryakyan Foot Peg Extenders and Pegs
Memphis Shades Alley Cat Windshield
Saddlemen Large Slant Saddlebags
Powersports Mini-Tachometer
Kawasaki Luggage Rack
Kuryakyan Iso-Grips
Airhawk cushion
Marlin's Clock
Re: Replacing Fork Seals - looking for advice
I've order fork seals and dust seals so I'll keep you guys posted! Maybe try to tackle it in the next couple weeks.
-
- Posts: 8
- Joined: Fri Jul 02, 2010 9:55 am
- Location: So. Calif.
Re: Replacing Fork Seals - looking for advice
neilybob wrote:I've order fork seals and dust seals so I'll keep you guys posted! Maybe try to tackle it in the next couple weeks.
Please do, mine has gotten worse, and the HOT weather dosen't help either. I'm interested to know if any "special" tools are really required, or if there's work arounds.
Not far from San Diego, Yuma is closer, can't get much farther south...
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
Dustbuster wrote:Please do, mine has gotten worse, and the HOT weather dosen't help either. I'm interested to know if any "special" tools are really required, or if there's work arounds.
Unfortunately neilybob hasn't been around in a while. I will be replacing the seals on my '94 within the next 2 weeks. I don't thing there's much difference. I talked to a local mechanic and he said avoid the leak proof brand. He said they don't work as good as the OEM seals. He said the OEM's should last several years and as much as 50K miles depending on how dirty of an environment you use you bike in. Jablonsky has some "bug deflectors" for lack of a better technical term, on his forks. I'm looking for a cheap source for these here in the states. I'll take plenty of pictures and post a how to if I am successful. There are some specialized tools that you can make cheaply out of household items.
Re: Replacing Fork Seals - looking for advice
Triangles wrote:... Jablonsky has some "bug deflectors" for lack of a better technical term, on his forks...
I have THESE. The same shop has also THESE and THESE available. I am convinced there are similar items in the States and they should not be expensive. Otherwise you can always make them yourself.
No hay banda. No hay Jablonsky. Todo está grabado. Nada es lo que parece, todo es una ilusión.
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
well I am 75% done I'm waiting on some parts. I'll update when I get the new parts in. Took several hours on the first fork as I was going slow. The second fork should take less than an hour.
-
- Posts: 8
- Joined: Fri Jul 02, 2010 9:55 am
- Location: So. Calif.
Re: Replacing Fork Seals - looking for advice
Triangles wrote:well I am 75% done I'm waiting on some parts. I'll update when I get the new parts in. Took several hours on the first fork as I was going slow. The second fork should take less than an hour.
I'll be waiting for the "don't do this, do THIS" report! Thanks!
Not far from San Diego, Yuma is closer, can't get much farther south...
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
WOOO HOOO success! My EN500A no longer leaks oil. It's really not all that complicated once you've figured it out. I was a little hesitant to declare victory because it still appeared to leak a little oil. After riding a few miles the area around the seal is no longer moist. I guess the might need to "break in" a little to seal better? I'll post more details when I find the pictures I took.
-
- Posts: 8
- Joined: Fri Jul 02, 2010 9:55 am
- Location: So. Calif.
Re: Replacing Fork Seals - looking for advice
Cool, still haven't tackled mine as yet...
Not far from San Diego, Yuma is closer, can't get much farther south...
Re: Replacing Fork Seals - looking for advice
Same. I've got a complete set of seals and bushings sitting in the garage ready to go, but until the spare bike is on the road I'm holding off.
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
I've been dragging my feet getting things updated around here. between computer problems and life's been pretty crazy busy this summer I haven't gotten much done. I'll try to make time this weekend to get a How-to put together on the fork seals.
- Triangles
- Site Admin
- Posts: 819
- Joined: Sun Dec 27, 2009 10:35 pm
- I ride: '94 Black Cherry Vulcan 500, '06 Candyfire Red Vulcan 500 LTD
- Location: Toledo Ohio
- Contact:
Re: Replacing Fork Seals - looking for advice
Anyone find these available in the states? Im too lazy to make my own. I did some searching and can't seem to find them. I think I want them after discovering how ridiculously expensive new fork tubes are. The fork tubes on my 500A are shot. OEM tubes would be in the neighborhood of $350-400. I found an after market tube manufacturer that would sell them for $281 shipped.
Re: Replacing Fork Seals - looking for advice
Triangles wrote:Anyone find these available in the states? ...
THESE might work.
Or THESE. You can always paint them black.
No hay banda. No hay Jablonsky. Todo está grabado. Nada es lo que parece, todo es una ilusión.
Return to “Wheels - Suspension & Brakes”
Who is online
Users browsing this forum: No registered users and 1 guest