Page 1 of 1
intro
Posted: Sat Jul 26, 2014 3:28 pm
by WylzC
hello from UT. Recently back from Iraq/Afg, got my Vulc500 out of 5yrs3months storage, am in process of getting her going. Have been canvassing the internet for advice on many tech details. Seems like a good idea to sign up with this forum, to take advantage of everyone's knowledge. Thanx in advance. -WC
Re: intro
Posted: Sun Jul 27, 2014 7:56 am
by Triangles
Welcome to the forum and thank you for your service! After that long of storage you will likely have a huge flat spot in the middle. If you're lucky a tank with some carb cleaner followed by a few more tanks of gas thru the bike will dissolve the gunk in the carb and you won't have to take them apart to clean them.
Re: intro
Posted: Wed Aug 06, 2014 9:48 am
by WylzC
yes flat spot noted. Removed & cleaned out tank, changed plugs, oil, filter, new battery, topped off fluids, fresh gas w/techron -- she started on first try, & runs well save for the flat spot. Hopefully the techron & startron will do their job.
